New Productive Tool Holders Coming From Iscar Head The Way In Machining Productiveness

Iscar's Heliturn platform features a unique, double-sided insert with 4 cutting edges for Fast Metal Removal (FMR) turning. The completely new Heliturn is a tangentially clamped insert using a specific helical shaped cutting edge, useful for tremendous depths of cut and greater than common feed rate. The LNMX...-HT Heliturn insert is screw-clamped into the SLANR tool holder and supported by the TLN ..-HT carbide seat. This seat has ground surfaces on the top and bottom, to provide perfect contact of the insert with the tool holders. The upper rake face of the insert is mounted level with the top of the tool holder to facilitate chips to flow across the insert, without being complicated by clamps or the tool holder body. The 4 curved helical cutting edges assure positive radial rake angles and soft penetration into the metal being cut. The reduced forces and smaller loads provide better tool longevity, higher stability and the ability to use extraordinarily tremendous depths of cut and elevated feeds. The chipformer, distorts and breaks the chip into rib type curved pieces which can immediately be removed from the cutting area. This insert has a frontal clearance angle of 3.7 with a 6 side clearance angle to grant machining to a 90 shoulder. Depth of cut up to .315" and facing depths to .126" at up to .047" IPR are achievable with Heliturn.

When contrasted to CNMG/M 16... or WNMG/M 13... insert sizes with the identical corner radius, much improved tool life can be foreseen when using the LNMX 1506..-HT insert. Iscar has recently added a lesser size to the Heliturn family - the LNMX 1104..R/L-HT insert and tool holder for the common application range of up to .197" depth of cut. The unique insert features all of the blessings of the larger insert. This increases the economical usefulness in the medium machining application extent. When compared to CNMG/M 43. 12... or WNMG/M 43. 08... insert sizes with the same corner radius, a substantially better tool life can be predicted. The inserts are accessible in .031, .047 and .063" tool nose radii. Heliturn inserts are attainable in the most exceptional carbide grades: IC9025, IC3028 , IC428, IC907, and IC908.

The external tool holders are attainable in 1, 1.25 and 1.5" shank sizes. Boring bars are offered in 1, 1.25 1.5 and 2" bar sizes. Also available are exchangeable heads. These tool holders have Iscar's unique Hard Touch coating, which enhances/increases/expands/heightens/stretches holder life and thwarts corrosion. As a result of the location of this insert, machining next to the tailstock is plausible.

The high positive rake angle of these tools allows 10-15% less power consumption/utilization/expenditure than normal tool holders at the same parameters.

By utilizing Iscar's Heliturn tools, tremendous cost savings and profitability in lathe operations is insured.

A Unique 80 Degree Rhombic Insert with high helical cutting edge for high metal removal rates Iscar is presenting the CNMX 1207..-HTW insert family. The completely new insert has a very positive radial, helical cutting edge and a positive rake angle; a incorporation which extensively decreases the cutting forces. The insert's corner has a wiper arrangement which supplies high surface finish even at high feed conditions, which in many occasions can take out a finishing cut. The corner angle is 88 degrees which provides expanded strength. The CNMX inserts were produced for heavy machining applications. Their unusual design ensures dependable, fast metal removal when using 80 degree rhombic inserts. They can be mounted on any conventional tool holder that carries typical CNMG inserts, but the seat has to be substituted with a special seat: TCH 4. Iscar's R-clamp tool holders are highly favored for heavy machining applications.

Which Kinds Of Things Do Machinists Utilize In Their Employ?
The things machinists do and utilize is kind of a mystery to the remainder of the world. We know that these workers are necessary, however we are not one hundred percent certain regarding why exactly we require them.

A New Wood Chipper Can Make It Much Simpler To Clean Up Brush In The Lawn
A wood chipper can be a great tool to help clean up your yard and for making chips for landscaping. Here are a few things you need to know about when picking one.

Saving You Hardware Problems And Lots Of Money: Purchasing The Ideal Cordless Drill
Whether you're an avid craftsman or an amateur just looking to fix things around the house, to buy a cordless drill can be a daunting task.

Why People Prefer Digital Caliper.
Here are some of the top reasons for considering a digital caliper. Depending on the size of your requirement you can get a caliper for about $49-100. A battery is used to power the device. It lasts and so you do not have to worry about replacing the battery.

Learn Some Safety Hints Which You Need To Keep In Mind While Working With Power Tools
Power tools are becoming a basic part of the home tool kit. They make it easier to fix problems in the home as well as to complete Do It Yourself (DIY) projects and not have to rely on professional help.

Kreg Jig Projects - Why You Need To Get A Pocket Hole Jig
If you love working with wood, then you have probably created your fair share of cabinets, cupboards, and other similar kinds of projects. Not only is it very enjoyable, it is also very therapeutic.

Speaking About The Particular Kreg Jig Pocket Hole Unit
Ask any woodwork enthusiasts what is the most popular and familiar of tools to them and invariably the response will be the pocket hole jig. This is of course that tool which allows wood to be joined together through the pocket hole joints it makes.