Original Tools And Carbide Insert Shapes From Iscar To Better Enhance The Machining Process

Iscar is releasing Penta 34 carbide inserts using a unique PB chipformer. The PB chipformer incorporates a single cavity utilizing a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer by having a distinct frontal edge.

The revolutionary chipformer was engineered for machining soft materials. It is an excellent solution for parting bearing steel and other highly ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.

The combination of the brand new chipformer and IC908 grade provides extraordinary chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the ingenuous IC908 PVD coated grade. The revolutionary family broadens the application range of Iscar's largest efficient grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when sized up to a competitor's tool, is a leading solution for machining any soft and ductile material.

Iscar's Upgrades for Parting

Iscar has developed a innovative family of reinforced Tang-Grip blades for the applauded TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced fabrication, can be employed in long overhang. Only the part of the blade essential for penetration (cutting depth) has a reduced width. The remainder is thick, which provides enhanced rigidity and stiffness. These blades are an excellent solution for parting and grooving in between the main and sub-spindle of turn/mill machines. The single-ended insert has a incredibly rigid clamping and therefore provides a extraordinarily important advantage over any other system.

Further additions to Iscar's Grip family are Do-Grip carbide inserts manufactured from the completely new Sumo Tec carbide grades: IC807 IC808 and IC830. The completely new Sumo Tec grades unquestionably prolong insert life, due to the most advanced coating technology followed by a particular surface treatment. This also provides enhanced tool life due to decreased surface stress and an evenly coated top surface. The level surface contributes to continuous uninterrupted chip flow, less introduced heat and less friction. The new process promotes toughness and chipping resistance and thus curtails friction and built-up edge. This in turn increases and prolongs tool life at expanded machining conditions for all types of work piece materials. The new PVD process is composed of Iscar's AL-TEC coating technology, using the unique surface treatment.

Iscar's Chip Splitting Inserts
Iscar's completely new HM90 APCR 220605-CS grooved carbide inserts put an end to chip crowding obstacles in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts made particularly for aluminum milling. With two grooves pressed into each polished cutting face, the inserts split aluminum chips into a amendable size for easy, reliable evacuation despite the application's characteristic large chip volume. The 22 mm inserts, each with two edges, are designed to expand metal removal over the extensive range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work specifically well with Iscar's cutting edge HM90 EAL/FAL...22 aluminum rough milling cutters. Besides reliably clearing chips, the inserts conserve power and reduce chatter in long-overhang setups. The inserts feature a cavity on the bottom to make sure correct mounting in cutter chip pockets equipped with normal spring pins. For best chip control, Iscar endorses using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.

Iscar Offers A New Family Of Slitting Cutters Using Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Adds Their Latest Innovations To A Lengthy Line Of Prosperous Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Iscar Recently Releases Numerous Revolutionary Lines To Enlarge Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

A Couple Of The Countless Advancements In Carbide Inserts Coming From Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

The Latest In Carbide Endmill Architectures In A Extensive And Prosperous Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Revolutionary End Mills By Iscar Can Enhance Productivity While Decreasing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Completely New Land Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.

Innovative Car Manufacturing Jobs To Conserve The Economy
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.