The Latest In Carbide Endmill Architectures In A Extensive And Prosperous Line From Iscar

Manufacturers and die & mold shops can annihilate chatter problems in many milling operations with Iscar's cutting edge Chatterfree carbide endmill. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the chief source of chatter. This guarantees faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, customers also report longer edge life due to reduced chatter. The chatter-free function is offered in both solid carbide endmills and tips in Iscar's MULTI-MASTER replaceable-tip family. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for MULTI-MASTER tips. These new endmills are perfect for low power machines with ISO40 or BT40 adaptations. The solid carbide version can cope with full slot machining up to 2xD. Depth capability on the replaceable-tip variant is more limited since the active length is shorter. In full slotting operations on alloy steel, the solid carbide variant simply handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

FINISHRED - Revolutionary Solid Carbide Endmills

Iscar is introducing the EFR.. B44 and the MM EFS.. Finishred a innovative solid carbide endmill family. The Finishred carbide endmill is a aggregate of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more rapidly and adeptly than typical endmills. However, roughing endmills leave grooves on the machined surface. Hence, after using a roughing endmill, a finishing endmill must to be used in order to obtain a even surface finish. This means time-consuming tool change, setup time and necessity of maintaining 2 endmill types in the stock.

Features of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, 2 serrated flutes and 2 continuous flutes.

The cutting edges of the finishing flutes are radially further from the tool axis than the cutting edges of the serrated flutes. The finishing flutes eliminate the grooves caused by the roughing flutes, leaving a fine surface finish.

The tool is fully competent and enables running at rough machining parameters, resulting in finish surface quality.

The extraordinary tool design decreases vibration at high load applications.

The tool produces short and long chips concurrently. This chip mixture is evacuated more readily than each individual chip type, an excellent solution in slotting and cavity milling applications.

The Finishred is also offered with the Multi-Master indexable milling head option which incorporates the Finishred incorporates with the advantage of little setup time, no regrinding costs and the large range of shank and extension options are available for the Multi-Master milling heads.

A single tool replaces the roughing and finishing endmills; therefore cutting down stock.

Tool change and setup time can be discarded.

An extra tool position is gained on the machine

New Chip Splitting Solid Carbide Endmills for Elevated Metal Removal Rates

ISCAR is establishing the ECP-3/4L family of chip splitting endmills. The completely new endmills are available with 3 and four 38 degree flutes in grade IC900. They feature 2xD and long shanks with decreased neck diameter, which facilitate machining along high shoulders, at high feeds. These endmills, due to their chip splitting function and force distribution can be used very effectively on reduced power machines (CAT40/BT40/ISO40). The serrated cutting edge includes flat peaks which leave a better surface finish, in contrast to the current rougher carbide endmill. The ECP endmills are recommended for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the preceding tests conducted at assorted customers' locations showed remarkable results.

Push Pull Testing For Building Industry Supplying Calibrated Gauges. Stress Load Testing Methods For On Site Evidence To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Original Tools And Carbide Insert Shapes From Iscar To Better Enhance The Machining Process
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

Iscar Offers A New Family Of Slitting Cutters Using Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Adds Their Latest Innovations To A Lengthy Line Of Prosperous Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Iscar Recently Releases Numerous Revolutionary Lines To Enlarge Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Revolutionary End Mills By Iscar Can Enhance Productivity While Decreasing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Completely New Land Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.

Innovative Car Manufacturing Jobs To Conserve The Economy
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.